Warranty Statement - U-Line Origins Series Service And Parts Manual

Service and Parts Manual

Warranty Statement

On 11-1-98, U-Line Corporation modified the warranty provided with our units. We have
significantly improved the coverage of the sealed system in years two through five of the
unit's life. The new warranty covers parts and labor for one year from the date of pur-
chase. In years two through five, from the date of purchase, the warranty covers parts
and labor for the entire sealed system. The sealed system consists of the compressor,
condenser, evaporator, heat exchanger, dryer, hot gas bypass-valve and all connecting
tubing.
This decision reflects our continuing commitment to strive to maintain the leadership
position within the under counter refrigeration and ice making industry whether that be
through design, product innovation, or enhanced consumer warranties. This decision
reinforces the confidence that U-Line has in the performance and reliability of our prod-
ucts.
Our previous warranty covered parts and labor for one year from the date of purchase
plus four additional years for the compressor, part only.
The new, modified warranty applies only to units shipped after 11-1-98. All units
shipped before 11-1-98 have the previous warranty.
PRODUCTS SHIPPED BEFORE 11-1-98 - Warranty covers parts and labor for one year
from the date of purchase, plus four additional years for the compressor (part only).
PRODUCTS SHIPPED AFTER 11-1-98 - Warranty covers parts and labor for one year
from the date of purchase and covers parts and labor for the entire sealed system for
five years.
DETERMINING SHIP DATES
In order to assure that U-Line is Y2K compliant, we have recently completed a major
computer system modification. The new computer system has lead to changes in the
way we operate in most areas of the company. You'll soon notice that our packing lists
are different, our invoices are different, our checks are different, and more. The change
that will impact you the most is the change in serial numbers.
With the new computer system, our serial number format has changed. There are some
definite advantages that go with the new format, such as being able to tell the month
and year in which the unit was produced.
The new serial number format breaks the number down into four segments. A typical
serial number is 047413-06-0100. The first segment 04, represents the year that the
unit was made. The second segment 7413, represents the shop order number. This
can be a three or four digit number. Order number 7413 is assigned for Model
WH95TP units. The third segment – 06 represents the month that the unit was made.
The forth segment – 0100 represents a sequence of numbers that is used internally at
U-Line Corporation.
4