U-Line SP-18 Specifications

ICE MAKER

Model SP18 - Low Profile
FEATURES
1. High ice production
2. Short/low profile
3. Front vented for built-in installation
4. Corrosive resistant components
5. UV resistant components
6. No drain required for water
7. Conserves water
8. Field reversible door
9. Adjustable temperature control
10. 1/2 inch wide flange
ADDITIONAL FEATURES:
• Travel pin keeps door securely closed
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
• Shipping weight: 68 lbs.
• Vinyl clad steel cabinet
• Available in white or black
• See through, removable ice bucket
KCC Printed in U.S.A.
13-13/16
(35.1)
* WATER LINE
INLET
15-1/16
(38.2)
* POWER CORD
W/FLANGE
* ON BACK OF UNIT
BENEFITS
Produces up to 20 lbs. of ice per day and stores 12 lbs.
Takes up minimal amount of space.
No need for extra fans or special venting to the outside of cabin.
Do not obstruct front grille.
Hinges and fasteners are stainless steel to prevent corrosion.
White model has metal door frame and handle, and specially coated grille
to withstand adverse effects caused by the sun.
Easy and inexpensive to install; only needs 1/4" outside diameter water
line connection.
Only 2-1/2 gallons of water required to produce approximately 20 lbs. of ice.
Fits any location, easy access. Zero clearance door swing.
Permits adjustment of daily ice rate.
Surrounds front of cabinet for easy mounting in surrounding cabinets.
All specifications subject to change without notice.
24-13/16
(60.5)
15-1/8
(38.5)
18-7/8
(47.9)
HT/W
FLANGE
18-1/2
(47.0)
ADD 1-1/2" TO DEPTH FOR
WATER LINE CONNECTION
INCHES (CENTIMETERS)
8900 N. 55th Street
Milwaukee, Wisconsin 53223
(414) 354-0300
FAX (414) 354-7905
www.u-line.com
22
(55.8)
8-1/
(20.
1/2
(1.3)
P/N SS-SP18