G Speaker Connector; Hcpu Multiply Jumper - TYAN Tiger 230T S2507T User Manual

2.6-G. Speaker Connector (SPEAKER)
This is the 4-pin connector for a speaker.
2.6-H. CPU Multiply Jumper (JP9) (optional)
JP9 is for multiplier settings for the CPU. All of the settings for JP9 are printed onto the board, next to the
CPU1 socket. NOTE: JP9 affects engineering sample CPUs only.
CPU multiplier settings, if used improperly, can seriously damage your mother-
board and/or CPU! Tyan takes no responsibility and will not be held liable for dam-
NOTE:
age related to the improper setting of JP9.
14
1
SPEAKER
power in
CPU1
JP9
2 3
no connect no connect
http://www.tyan.com
4
speaker