TYAN S8212 User Manual page 56

3.3.10 Remote Access Configuration
Remote Access
Enables remote access to system through serial port.
Disabled / Enabled
Serial port number
Select Serial Port for console redirection. Make sure the selected port is
enabled.
COM1/ COM2 / COM3 (virtual for BMC)
Serial Port Mode
Select Serial Port settings.
Flow Control
Select Flow Control for console redirection.
None / Hardware / Software
Redirection After BIOS POST
Disabled: Turns off the redirection after POST Boot Loader;
Boot Loader: Redirection is active during POST and during Boot Loader;
Always: Redirection is always active. (Some OSs may not work if set to Always)
Terminal Type
56
http://www.tyan.com