Type B: SCREW RETENTION TYPE HEATSINK
1. After placing CPU back-plate and
adhesive interface material under
motherboard, place heatsink
retention frame on top of
motherboard. Align heatsink
retention frame screw hole with
backplate assembly standoffs. Place
heatsink inside plastic retention
bracket. Place metal clip over
retention frame tab. Repeat for other
side.
2. Insert screw through metal clip.
BE SURE METAL CLIP IS
LOCKED ONTO RETENTION
FRAME TAB.
3. Tighten screw through metal clip.
Repeat on the other side.
DO NOT OVER TIGHTEN.
25
http://www.tyan.com