Main Menu - TYAN Thunder i860 S2603 User Manual

Main Menu

This is the Main Menu setup that displays the Host Bus Adapters and their corresponding settings. Below
are the fields available along with their descriptions.
Field
Adapter
PCI Bus
Dev/Func
Port Number
IRQ
NVM
Boot Order
The next page describes the Boot Adapter List menu, available from the Main Menu.
52
Details on field
Indicates the specific Symbios Host Adapter
The PCI Bus number (range 0x00 - 0xFF, 0 - 255
decimal) assigned by the system BIOS to an adapter
Indicates the PCI Device/Function assigned by the
system BIOS to an adapter.
An 8-bit value mapped as follows:
Bit # 7 6 5 4 3 2 1 0
Bits 2-0: Function (range 0 - 7)
Bits 7-3: Device (range 0x00 - 0x1F, 0-31
decimal)
Indicates the I/O Port Number that communicates
with an adapter. The system BIOS also assigns this
number.
Indicates the Interrupt Request Line used by an
adapter. The system BIOS also assigns this value.
Indicates whether an adapter has non-volatile mem-
ory (NVM) associated with it. An adapter's configura-
tion is stored in its associated NVM. NVM can refer
to NVRAM that is resident on a host adapter or to
system NVS.
Indicates the relative boot order (0 to 3) of an
adapter. The Symbios SCSI BIOS traverses up to
four adapters in the specified order in search of
bootable media. Access the "Boot Adpater List"
Menu to modify this item.
http://www.tyan.com