Dide Devices Screen - TYAN Thunder i860 S2603 User Manual

3.2-D. IDE Devices screen
Options related to the PCI slots can be altered through this screen.
Primary Master/Slave
Secondary Master/Slave
Type
Multi-Sector Transfers
LBA Mode Control
32-bit I/O
(continued on next page)
38
Discussed below
Discussed below
FORMAT: [option]
OPTIONS: None
1 to 39
User
Auto
IDE Removeable
CD-ROM
ATAPI Removeable Removeable ATAPI media
NOTES: All options are dependent on the drive.
FORMAT: [option]
OPTIONS: Disabled
Standard
2 sectors
4 sectors
8 sectors
16 sectors
NOTES: All options are dependent on the drive.
FORMAT: [option]
OPTIONS: Disabled / Enabled Enabling LBA causes logi-
NOTES: All options are dependent on the drive.
FORMAT: [option]
OPTIONS: Disabled / Enabled Enables 32-bit communi-
NOTES: All options are dependent on the drive.
Auto-typing is not able to
supply the drive type, or
the user has selected
None to disable any
drives that might be
installed.
Pre-configured drive
parameters. This option is
dependent on your drive.
The user must define the
different parameters of
the drive.
Auto-detect the drive
parameters.
Removeable read-and-
write media (e.g. Zip
drive).
Readable CD-ROM drive.
(e.g. USB Zip drive).
DIsables the feature.
Standard is 1 sector per
block.
Number of sectors trans-
ferred per block.
cal block addressing to be
used in place of Cylin-
ders, Heads, and Sectors.
cation between CPU and
IDE card. Requires PCI or
local bus.
http://www.tyan.com