Installing Memory - TYAN Thunder i860 S2603 User Manual

2.8 Installing Memory

Please keep in mind that although some memory modules may appear to be high-quality, they may con-
tain inferior or substandard parts. The type of memory you choose to install should be checked against
the memory compatibility list, which is available from Tyan's website at http://www.tyan.com
Memory Installation Procedure
1
Step
Line up your module so that the pins fit into the slot. There is only one way your memory
module can fit properly. Make sure that the short row of pins is lined up with the short gap in
the RDRAM socket. See Figure 2.1 (on p.17) for graphic details on how the memory should
be installed.
Insert the memory module by pushing it into the socket with even force. Do not insert one
2
Step
end and then the other: install the whole module at once or you might damage the memory
module and/or the socket.
3 Lock the memory into place by pushing the clips back on either end of the socket onto the
Step
notches in the ends of the memory module, as shown below.
Memory Uninstallation Procedure
Removing the RIMM is just the reverse: simply pull back the clips from the memory module (as shown
below), and carefully pull the module straight out. Place the memory modules in an anti-static bag as
soon as you remove them to avoid static damage.
Also take care that you do not cause yourself injury if you are removing the
NOTE:
memory modules after using the motherboard, since the module(s) may be hot.
18
1
1
2
2
http://www.tyan.com