Chapter 4: Diagnostics - TYAN Thunder K8W S2885 User Manual

Chapter 4: Diagnostics

Note: if you experience problems with setting up your system, always check the
following things in the following order:
By checking these items, you will most likely find out what the problem might
have been when setting up your system. For more information on
troubleshooting, check the Tyan website at:
4.01 Beep Codes
Fatal errors which halt the boot process are communicated through a series of
audible beeps.
(1) Memory module initialization failed
(a) memory modules might not be plugged in correct configuration
(b) wrong type of memory
(c) bad memory modules
(2) Graphics initialization failed
Before contacting your vendor or Tyan Technical Support, be sure that you note
as much as you can about the beep code length and order that you experience.
Also, be ready with information regarding add-in cards, drives and O/S to speed
the support process and come to a quicker solution.
4.2 Flash Utility
Every BIOS file is unique for the motherboard it was designed for. For Flash
Utilities, BIOS downloads, and information on how to properly use the Flash
Utility with your motherboard, please check the Tyan web site:
http://www.tyan.com
Please be aware that by flashing your BIOS, you agree that in the
event of a BIOS flash failure, you must contact your dealer for a
NOTE
replacement BIOS. There are no exceptions. Tyan does not have a
policy for replacing BIOS chips directly with end users. In no event
will Tyan be held responsible for damages done by the end user.
CPU, Memory, Video
http://www.tyan.com
58
WWW.TYAN.COM
.