TRENDnet TW100-S4W1CA User Manual page 54

Broad band ip gateway + 4-port fast ethernet switch

Hide thumbs Also See for TW100-S4W1CA:

Table of Contents

On the top, the "Host Name" and "DNS server" of the computer are configured to call when it

is looking for a named resource. The default gateway is the server through which the client

connects to the Internet. The DHCP Server identifies the network server that assigns IP

addresses to computers on the network.

If the product is working properly, the following should be apparent from this screen:

1) The Client should have an IP address within the prescribed range.

The "DHCP" and "Default Gateway" should list the product's local port address (the

device's IP address).

3) The DNS server IP addresses should match the DNS server IP addresses set in the

device.

IPCONFIG

For Win NT and Win2000, go to "Start"?"Programs"?"Accessories"?"Command Prompt"

to open the Command Prompt. Type in IPCONFIG /ALL and hit "Enter" to see the adapter's

information. Type in IPCONFIG /RELEASE to release all adapters' IP address and IPCONFIG

Figure 19: IP Configuration

- 50 -

Click here

to reveal

more.

Table of Contents