TRENDnet TW100-S4W1CA User Manual page 21

the following three types of filter. Each filter can be set to filter (drop) or forward (pass)
packets. You can input up to six filters in this device.
Network Adapter Address Filter: Filter according to local computer's network adapter MAC
address (also known as the adapter card's Physical Address).
IP Address Filter: Filter with computer's IP address.
Single/Range: You can filter a single IP, or a range of the IP addresses.
IP Range: Enter the Start and End IP addresses for a range of IP addresses for filter/forward.
Direction ?From Local IP ?To Remote IP: filtering IP address of a local computer; or
filtering IP address of a remote server (this remote server connects to the device via Internet).
TCP/UDP Port Filter: Filter using the port number. You can set filter for a single port or a
range of ports.
Filter/Forward: Select action (Filter/Forward) for the assigned port(s).
Single/Range: You can filter a single port (i.e. 80), or a range of ports (i.e. 80 to 125)
Port Number: The port number(s) for the filters.
Port Type:
TCP port: filter according to the Connection-Based Application Service on the
remote server using the port number.
UDP port: filter according to the Connectionless Application Service on the remote
server using the port number.
ADD: Each time you finished setting the filters, click the Add button and the added filter will
appear on the Filter List.
RESET: Click "RESET" to clear all the settings on this page.
Filter List: Display all the Packet Filters.
DELETE ALL: Click to delete all the filters on the list.
DELETE: Click to delete the selected filter.
- 17 -