Installing On Wireless Network; Installing The Drivers & Software - Canon PIXMA MX432 Network Setup Manual

Installing the Drivers & Software
<< Previous Next >>
Installing the PIXMA MX432 / MX439 on Your Wireless Network
If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the
installation routine of the software that shipped with your PIXMA.
*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don't have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.
If the following screen appears, click Continue Installation
Continue following on-screen instructions until the Connection Method Selection (1-1) screen appears. This is shown on the next
page..
6