Database Coverage Explanations; If The System Needs; Service; Ordering Map Dvds - Cadillac DTS Navigation Manual

If the System Needs

Service

If the navigation system needs
service and the steps listed here
have been followed but there are
still problems, see your dealer for
assistance.

Ordering Map DVDs

The map DVD in the vehicle is the
most up-to-date information
available when the vehicle was
produced. The map DVD is updated
periodically, provided that the map
information has changed.
For any questions about the
operation of the navigation system
or the update process, contact the
GM Nav Disc Center toll free
phone number, 1 877 NAV DISC
(1 877 628 3472) or go to the
center's website,
www.gmnavdisc.com. For any
updates or replacements, call the
GM Nav Disc Center or order a new
disc online. Have the Vehicle
Identification Number (VIN)
available when ordering to ensure
the correct and most up-to-date
DVD map disc for the vehicle is
sent. See Vehicle Identification
Number (VIN) in the Index of the
vehicle's owner manual for more
information.
After receiving the updated disc,
replace the old disc in the
navigation system. See Installing
the DVD Map Disc and Ejecting
the DVD Map Disc under
. Dispose of the old disc to
avoid confusion about which disc is
the most current.
Database Coverage
Explanations
Coverage area depends upon the
map detail available. Some areas
have greater map detail than others.
The navigation system works only
as well as the information provided
on the map disc. See
on how to obtain
updated map information.
Infotainment System

Voice Recognition

The navigation system's voice
recognition allows for hands-free
operation of the navigation system,
audio system, and OnStar
features. The DVD map disc must
be installed in the navigation system
for voice recognition to work. See
Installing the DVD Map Disc under
. Voice recognition
can be used when the ignition is on
or when Retained Accessory Power
(RAP) is active. See Retained
Accessory Power (RAP) in the
Index of your vehicle's owner
manual and for more information.
To use voice recognition, do the
following:
1. Push and hold the SRCE
(source) steering wheel control
until you hear a beep. The audio
system, if on, will mute.
2. Clearly state one of the
commands listed on the
following pages.
63
®