High Intensity Discharge; (Hid) Lighting; Led Lighting; Fog Lamps - Cadillac CTS Owner's Manual

2012
Hide thumbs Also See for CTS:
Table of Contents

Advertisement

High Intensity Discharge

(HID) Lighting

{
WARNING
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Fog Lamps

To replace a front fog lamp bulb:
1. Pull out the push-pins located on
the underside of the protection
shield to remove the shield.
2. Reach up behind the front
bumper area from under the
vehicle to access the lamp
housing.
Vehicle Care
3. Remove the electrical connector
from the bulb by lifting the two
plastic clips.
4. Remove the bulb socket from
the lamp housing by turning the
bulb socket one-quarter turn
counterclockwise.
5. Pull the old bulb from the lamp
housing keeping the bulb
straight as you pull it out.
6. Install a new bulb.
7. Reinstall the electrical
connector by pushing in the
two plastic clips.
8. Push the bulb socket into
the lamp housing and turn
the socket one quarter turn
clockwise.
10-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents