Cadillac CTS Owner's Manual page 239

Vehicles with a Bluetooth
can use a Bluetooth-capable cell
phone with a Hands-Free Profile to
make and receive phone calls.
The system can be used while
the ignition is in the ON/RUN or
ACC/ACCESSORY position.
The range of the Bluetooth system
can be up to 9.1 m (30 ft). Not all
phones support all functions,
and not all phones work with
the Bluetooth system. See
www.gm.com/bluetooth for more
information on compatible phones.
Voice Recognition
The Bluetooth system uses voice
recognition to interpret voice
commands to dial phone numbers
and name tags.
For additional information say
"Help" while you are in a voice
recognition menu.
®
system Noise: Keep interior noise levels to
a minimum. The system may not
recognize voice commands if there
is too much background noise.
When to Speak: A short tone
sounds after the system responds
indicating when it is waiting for a
voice command. Wait until the tone
and then speak.
How to Speak: Speak clearly in a
calm and natural voice.
Audio System
When using the in-vehicle Bluetooth
system, sound comes through the
vehicle's front audio system
speakers and over-rides the audio
system. Use the audio system
volume knob, during a call, to
change the volume level. The
adjusted volume level remains in
memory for later calls. To prevent
missed calls, a minimum volume
level is used if the volume is turned
down too low.
Infotainment System
Bluetooth Controls
Use the buttons located on the
steering wheel to operate the
in-vehicle Bluetooth system.
See Steering Wheel Controls on
page 5 3 for more information.
b g
/ (Push To Talk): Press to
answer incoming calls, confirm
system information, and start
speech recognition.
c ª
/ (Phone On Hook): Press
to end a call, reject a call, or cancel
an operation.
For vehicles without a navigation
system, the system responds with
"Ready" followed by a tone.
For vehicles with a navigation
system, the system responds with a
tone. After the tone, say "Hands
Free." The system responds with
"Ready" followed by a tone.
7-39