Park Brake And P (Park) Mechanism Check - Cadillac CTS Owner's Manual

2012
Hide thumbs Also See for CTS:
Table of Contents

Advertisement

3. With the engine off, turn the
ignition on, but do not start the
engine. Without applying the
regular brake, try to move the
shift lever out of P (Park) with
normal effort. If the shift lever
moves out of P (Park), contact
your dealer for service.
Ignition Transmission
Lock Check
While parked, and with the parking
brake set, try to turn the ignition to
LOCK/OFF in each shift lever
position.
The ignition should turn to
.
LOCK/OFF only when the shift
lever is in P (Park).
With the key access ignition
.
system, the ignition key should
come out only in LOCK/OFF.
See Ignition Positions (Key
Access) on page 9 17 or Ignition
Positions (Keyless Access) on
page 9 19.
Contact your dealer if service is
required.
Park Brake and P (Park)
Mechanism Check
{
WARNING
When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case it begins to
roll. Be ready to apply the regular
brake at once should the vehicle
begin to move.
Vehicle Care
Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake,
set the parking brake.
To check the parking brake's
.
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.
To check the P (Park)
.
mechanism's holding ability:
With the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.
Contact your dealer if service is
required.
10-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents