How To Scan To A Memory Card Or Usb Flash Memory Drive - Brother DCP-J525W Basic User's Manual

Printing photos from a memory card or USB Flash memory drive (DCP-J725DW only)
How to scan to a
memory card or USB
Flash memory drive
You can scan monochrome and colour
documents onto a memory card or USB Flash
memory drive. Monochrome documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Colour documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 200 dpi and
the default file format is PDF. The machine
automatically creates file names based on
the current date. (uuQuick Setup Guide) For
example, the fifth image scanned on July 1,
2011 would be named 01071105.PDF. You
can change the colour and quality.
Quality
Color 100 dpi
Color 200 dpi
Color 300 dpi
Color 600 dpi
B/W 100 dpi
B/W 200 dpi
B/W 300 dpi
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while the status
LED is blinking to avoid damaging the
card, USB Flash memory drive or data
stored on them.
b
Load your document.
c
Press Scan.
d
Press Scan to Media.
5
Selectable File
Format
JPEG / PDF
JPEG / PDF
JPEG / PDF
JPEG / PDF
TIFF / PDF
TIFF / PDF
TIFF / PDF
e
Press Options.
Do one of the following:
 To change the quality, press s or t
to display Quality.
Press Quality and choose
Color 100 dpi,
Color 200 dpi,
Color 300 dpi,
Color 600 dpi, B/W 100 dpi,
B/W 200 dpi or B/W 300 dpi.
To change the file type, press s or t

to display File Type.
Press File Type and choose PDF,
JPEG or TIFF.
If you want to change the file name,

press s or t to display File Name.
Press File Name and enter the file
name.
You can only change the first
6 characters.
Press OK.
 To start scanning without changing
additional settings, go to step f.
Note
• If you chose colour in the resolution
setting, you cannot choose the file type
TIFF.
• If you chose monochrome in the resolution
setting, you cannot choose the file type
JPEG.
f
Press Mono Start or Colour Start.
5
33