Measuring The Corner Angle; Determining The Miter Angle; Determining The Bevel Angle; Return To The Normal Mode - Bosch DWM 40 L Operating Instructions Manual

dwm40_bu_1609929990_t.fm5 Seite 10 Montag, 3. Juli 2000 3:

Measuring the Corner Angle

To measure the corner angle, place the legs
flat on the walls.
Store the corner angle by again pressing the
BV/MT button.
The entry is confirmed by the appearance of
"CNR" in the display.

Determining the Miter Angle

Press the BV/MT button again.
The value of the miter angle is displayed and
"MTR" appears in the display.

Note the value for the miter angle.

Determining the Bevel Angle

Press the BV/MT button again.
The value of the bevel angle is displayed and
"BVL" appears in the display.

Note the value of the bevel angle.

Return to the Normal Mode

Press the BV/MT button again.
The display switches to the normal measuring
mode.

Set the values noted for the miter and
bevel angle on the compound miter saw.
Note: For the cutting of the crown moldings,
observe the corresponding instructions in the
operating manual of the compound miter saw.
10