Button Functions - Blueant S1 User Manual

Button Functions

To...
Switch the S1 On
Switch the S1 Off
Enter Pairing Mode
Answer an Incoming
Call
Reject an Incoming Call Click
End the Current Call
Use Phone Voice
Dialing
Redial the Last
Outgoing Call
Adjust the Volume
Do This...
Hold for 1 second (until
the Bluetooth Light flashes blue).
Hold for 5 seconds
(until the Bluetooth Light turns red).
With the S1 off, hold
about 5 seconds (until the Bluetooth
Light starts flashing red and blue).
Click
Click
Hold for 1 second.
Hold for 3 seconds.
Click "Vol +" or "Vol -"
Notes
You will hear a beep indicating that
the S1 is switching on.
You will hear a beep indicating that
the S1 is switching off.
You must switch the S1 off first
for
before you can enter pairing mode.
You can also accept an incoming
call with your voice. For more
information, see "Answering
Calls" (page 8).
Although you can answer calls with
your voice, you can only reject a call
using the button.
You can also end the call by using
your phone's end call button.
You can only use this function if
your phone supports voice dial
functionality.
You may need to record voice tags
on your phone to use this feature:
see your phone's manual for more
details.
If you have two phones connected,
the S1 will redial the last outgoing
call on the primary phone. See
"Using More Than One Phone At
The Same Time (Multipoint)" (page
15)
for more information.
The Bluetooth Light will turn violet
when you reach the minimum and
maximum volume level.
21