Setting Port Forwarding On 2Wire 5012Nv-002 - Aztech WIPC401 User Manual

Wireless n pan/tilt ip camera

Hide thumbs Also See for WIPC401:

Table of Contents

User Manual

19. Close the Internet browser then UNPLUG your Ethernet cable that is connected to

the IP camera's Ethernet port from router's Ethernet port.

20. Wait until the Network LED to turn Blue then use the utility again to search for the

WIPC401 IP camera. Take note of the IP camera's IP Address and Http port (Port

number)

21. From your router it is a MUST to configure the router's Port Forwarding to allow you

to view your IP camera via the internet.

Setting Port Forwarding on 2wire 5012NV-002

1. Launch the Internet browser on your computer and input 192.168.1.254. This will

launch your Router's WEB User Interface.

Page 14 of 49

Table of Contents