Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c
Install the extension table.
Keeping the extension table level, fully slide it
into place. The lower right corner section of the
extension table extends over the front section of
the sewing machine bed.
a Lower right corner
b Sewing machine bed
Note
The optional extension table is available
through your Baby Lock retailer.
Turn the screw at the bottom of each leg to
d
adjust their height so the extension table will
be level with the sewing machine bed.
CAUTION
● Do not move the sewing machine while
the extension table is attached, otherwise
damage or injuries may occur.
e
When you are finished using the extension
table, remove it.
While slightly lifting up the extension table,
pull it off to the left.
b
a
f
Install the flat bed attachment back in its
original position.
Memo
With the legs folded up, the extension table
can be stored attached to the hard case.
The knee lifter can be stored attached to the
bottom of the extension table.
Sewing Cylindrical or Large Pieces 45
1
Advertisement
Table of Contents
