Specifications; Assembly Instructions - Axminster AW1416VS User Manual

Specification...
W
A X M I N S T E R
W H I T E
Axminster No.
Rating:
Power:
Speed:
Spindle Taper:
Spindle Thread:
Taper Tailstock
Distance Between Centres:
Max Diameter Over Bed:
Tool Rest Stem Diameter:
Overall L x W x H:
Weight:
Please read the Instruction Manual prior to using your new machine; as well as the operating
procedures for your new machine, there are numerous hints and tips to help you to use the machine
safely and to maintain its efficiency and prolong its life. Keep this Instruction Manual readily accessible
for any others who may also be required to use the machine.

Assembly Instructions...

Please take some time to read the section entitled "Illustration & Parts Description" to identify the
various parts of your machine so that you are familiar with the terminology we will use to enable you
to set up and operate your table lathe safely and correctly.
The machine and its accessories will arrive coated with corrosion preventative grease. This will need to
be cleaned from the machine, its components and accessories prior to it being set up and
commissioned. Use coal oil, paraffin or a proprietary degreaser to remove the barrier grease. Be
warned, it will stain if you splash it on clothing etc., wear overalls, coverall et al., rubber gloves are also
a good idea, as is eye protection if your cleaning process tends to be a little bit enthusiastic. After
cleaning, lightly coat the machine with a thin layer of light machine oil. N.B If you used
paraffin/kerosene make sure you apply this thin film sooner rather than later.
95% of the machine comes fully assembled, (See what's in the Box) to assemble the remaining 5%
please follow the instructions below.
Assembling the Carrying handles
Locate the two steel carrying handles (E) & the four
M6 x 16mm phillips screws, attach them to each end
of the lathe bed (See fig 1).
05
865 x 330 x 415mm (With Extension Bed: 1465 x 330 x 415mm)
230V 50Hz 560W
0-800,200-1,750, 400-3,600rpm
M33 x 3.5mm (Ref T38)
E
AW1416VS
Trade
2MT
2MT
400mm
350mm
25.4mm
41kg
Fig 1