Cabinet Assembly - Axminster AWESBS User Manual

B
Locate the four rubber foot bolts, remove the first M8
nut and washer (A) and Introduce the rubber foot bolt
through the underside of the base support plate and secure
in place using the M8 nut and washer you remove earlier
(B). (DO NOT OVER TIGHTEN) Assemble the remaining
foot bolts.
Both side support
panels assembled
Offer up both side support panels to the pre-drilled holes in the
base plate and using four M8x16 bolts & washers secure in place
using a 13mm spanner (DO NOT OVER TIGHTEN).
13mm Spanner
Base support plate

Cabinet Assembly ...

Base support plate
M8 bolt and washer
W
A X M I N S T E R
W H I T E
Step 1
A
Rubber foot bolt
Step 2
07