Avaya IP Office Installation Manual page 110

Procedure: Rack Mounting
1. Using the small screws (2), fix the main brackets (6) to the module.
2. Using the nut (5), bolt (3) and washer (4) provided, loosely fit the module into the rack system in its intended position.
3. If required, add the cable guide brackets (7) before finally tightening the nuts and bolts.
4. If required, connect the module ground points to the rack ground point. This should be done using 14AWG solid wire
with either a green sleeve (functional ground) or green and yellow sleeve (protective ground).
5. Continue installation and setup as normal.
IP Office Installation Page 110
IP Office 15-601042 Issue 19l (06 November 2008)