Table of Contents
Advertisement
(5 seconds)
Power Save Mode
-
-
Clear the Flash Icon and Melody
Sound on the LCD Screen Transmitter
-
Button Lock ( ) enable / disable
(2-second)
-
Melody / Vibration
(2-second)
-
F
Program Count Down Timer
(2-second)
(10-Minute / 20M / 30 M /1Hour /1.5H /
2.0H)
-
Enable / Disable Bi Sound
(2-second)
Pressing Button
1. Screen Lamp ON: Press and hold the
screen lamp will turn on for 5 seconds.
2. Power Save Mode For Remote Transceiver: While in the power save mode, the LCD
remote transceiver uses no current to save the battery power.
Entry: Press & hold the
button for 5 seconds, with one melody sound and
icon on the LCD screen to indicate entry the "power save mode".
Exit: Press any button of the LCD remote transmitter to exit the "Power Save Mode".
3. Clear the Flashing Icons and Melody Sound: Pressing the
clear the flashing icons and melody sound on the LCD screen transceiver
4. Stop The Trigger Melody Sound: While the alarm is triggered the LCD screen will alert the user through
a melody sound and flashing trigger icons. Pressing any button on the LCD remote transmitter will stop the
melody sound only.
5. Button Lock:
This is useful if you want to disable the transmission function of the remote control
temporarily to prevent any inadvertent pressing of buttons by others. Press the
button first, within 3 seconds press and hold the
or cancel the button lock function, the
the LCD remote transmitter is on "Button Lock".
6. Vibration / Melody Mode:
This mode is useful when you are in a noisy place and it is difficult to hear the beep sound
from the remote control. The unit will vibrate if your security system is triggered.
Press the
button first, within 3 seconds press and hold the
for 2 seconds to select the mode of vibration or melody, the
on the LCD screen to show the LCD remote transceiver is on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
The unit has a short "bi" sound while pressing the buttons of the LCD screen transceiver.
If you want mute the "bi" sound while buttons are depressed. Press the
(Bi)
press and hold the
button for 2 seconds to disable the "bi" sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short "bi" sound and the unit will flash
pressing the button of the LCD screen transceiver.
9. Set Up Fixed Count Down Timer:
1. Press the
button first, within 3 seconds press and hold the
LCD screen will shows
icon and timer (ie. 0:10) ,
F ( )
2. Press the
button again showing next order time on the screen ( ie.0:20), press them again
MA-200 OP REV.A
Press and hold the
5 seconds, 1 melody sound to
confirm entry.
Press the
within 5 seconds
Press the
seconds press and hold
for 2 seconds.
Press the
(
)
Mode
seconds press and hold
for 2 seconds.
Press the
(
)
seconds press and hold
for 2 seconds.
Press the
(Bi)
While
seconds
button for 2 seconds.
button for one second, with one melody sound and the LCD
button 3 times within 3 seconds will
( )
button for 2 seconds to activate
icon will displayed on the LCD screen to show
(
) button
icon will displayed
F ( )
button for 2 seconds, the
9
Oct/23/2006
button for
button 3 times
button first within 3
button
button first within 3
button
button first within 3
F
button
button first within 3
press
and
hold
button first, within 3 seconds
icon while
Advertisement
Table of Contents
