Table of Contents
Advertisement
On (Solid)
Valet Mode
D. CHIRP INDICATORS:
Chirp
Function
1 chirp
Arm
2 chirps
Disarm
4 chirps
Disarm / Triggered
6 chirps
Car locator
F. SYSTEM OPERATING CONDITION:
Siren, Horn
1. Arming
1 Chirp
2. Disarming
2 or 4 Chirps
3. Trigger
Alarming
4. Passive Starter Disable
5. Panic
Alarming
6. Car Locator
6 Chirps
G. ACTIVE ARMING :
1. Press the
button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating the system is
armed. The LED will begin to flash and the engine starter will be disabled.
SILENT ARMING: Press the
transmitter to arm your security system, No chirp sound will be heard. Arm
confirmation will be through the motorcycles parking lights only.
ARMING WITH NOISELESS MODE: With the system disarmed, press the
chirp once. Within 3 seconds, press
system is set and will be fully armed in 5 seconds with the noiseless mode for one arming cycle. In this
mode, whenever vibration is presented to the protected motorcycle, the shock sensor cannot trigger the
system and the system will only emit a few warn away chirps.
ARMING WITH SHOCK SENSOR BY-PASS: Pressing the
5 seconds will arm the security system and by-pass the shock sensor. The system will chirp one additional
time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to
activate for one arming cycle only. The security system will return to normal operation during the next
arming cycle.
PASSIVE STARTER DISABLES: The purpose of the feature is to protect the motorcycle from being stolen
at all times, regardless of whether or not the alarm is armed.
The starter of the vehicle will be disabled 60 seconds after the ignition is turned off. Once the key is turned
off, the LED will flash fast for 60 seconds.
After the 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate) to indicate
the passive starter disable is activated and the system will not respond to any trigger input except the
ignition trigger.
ARMING WITH PATHWAY ILLUMINATION: Press the
chirp once. Within 3 seconds, press the
illuminate your pathway.
SILENT ALARM FUNCTION: Press the
arm and with "Silent Alarm Function". The siren / horn will be silenced even if the sensor is triggered in the
armed status.
H. PASSIVE ARMING
Active arming and disarming is controlling your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature which allows the security system to arm 30
seconds after the ignition switch is turned off. Operation is as follows.
1. Turn the ignition to the "OFF" position.
2. The security system LED will flash quickly for 30 seconds. Each time a sensor is triggered during the
passive arming countdown, the 30-second countdown starts over.
MA-200 OP REV.A
E. PARKING LIGHTS:
Parking lights
1 flash
Arm
2 flashes
Disarm
3 flashes
Disarm / Triggered
12 flashes
Car locator
Parking Lights
1 Flash
2 or 3 Flashes
Flashes
Flashes
12 Flashes
F
button first, within 3 seconds press
button again. The siren will emit one short chirp indicating the
button on the transmitter three times within
button once to arm the system, the siren will
F
button. The parking lights will turn "ON" for 30 seconds to
and
buttons at the same time. The security system will
4
Oct/23/2006
Function
LED
Starter
Slow Flash
Disable
Fast Flash or Off
Slow Flash
Disable
Flash
Disable
button on the
button once, the siren will
Advertisement
Table of Contents
