Installing The Bulb - Autopage NG?100 “Night Guard” Installation And User Manual

being careful not to touch the bare end of the wires or allowing them to touch each other. The
old light fixture should be free of the outlet box and can be discarded.
You are now ready to install your sensor light. Remove the fixture from its packaging and lay the
contents out in an orderly fashion.
INSTALLING THE BULB
Unscrew the lamp cover of the Light and install a 150W J-type lamp included.
Use gloves or a cloth towel and DO NOT touch the bulb with your hands
Re-fit the lamp cover and tighten the screws
WARNING ! ! !
BEFORE ATTEMPTING ANY INSTALLATION OR
MAINTENANCE, ENSURE THAT THE
ELECTRICAL SUPPLY IS SWITCHED OFF AND
THE CIRCUIT FUSES REMOVED OR THE
CIRCUIT BREAKER IS IN THE "OFF" POSITION.
.
7