Table of Contents
Advertisement
J： Detection alert. The background of any triggered sensor will illuminate RED when the
sensor is triggered.
Bulb replacement (
1. Turn OFF power at the breaker box.
2. Take-off the water-proof cap and remove screws, frame and glass.
3. Remove the used bulb and set a new one (gloves should be used).
4. Reassemble, screw and cover the water-proof cap.
5. Turn ON power
SPECIFICATIONS:
Detection Method:
Sensor Range:
Camera:
Power source:
Light ON Time:
PIR Sensitivity:
Load Rating:
Waterproof rating:
Operating Temperature: -20 to 135 F
Halogen lamp 150w, J short type, length: 78mm, cap: R7s)
Passive Infrared Sensor (with continuously detect function)
10m x 210° (maximum)
Color CMOS image sensor
View angle 60°
Transmission frequency: 2.4GHz FCC Approved
AC 110V 50/60Hz
60 seconds.
10m
J-Type 150 Watts Max.
IP55
Sample of Quad View
22
Advertisement
Table of Contents
