ATEN CM0264 User Manual page 26

CM0264 User Manual
(Continued from previous page.)
Press and hold port selection pushbuttons 1 and 2 simultaneously for 2
seconds to start Auto Scan Mode. See Going Directly to a Port, page 24
for details.
Note: Press and release either port selection pushbutton to stop Auto Scan
Mode. The KVM focus goes to the computer attached to the
corresponding port of the pushbutton you pressed.
Press and hold port selection pushbuttons 3 and 4 simultaneously for 2
seconds to execute a KVM reset. See KVM Reset, page 19 for details.
16