ATEN CM0264 User Manual page 20

CM0264 User Manual
(Continued from previous page.)
8. Using the custom HDMI KVM cable set, plug the HDMI cable connectors
and accompanying USB and audio connectors (if required) into their
corresponding sockets on the rear of the switch.
Note: If the HDMI console display has built-in speakers and supports
audio through its HDMI interface, there is no need to use the speaker
connectors on the custom HDMI KVM cable sets.
9. At the other end of the cable, plug the HDMI and USB cables into their
respective ports on the computer(s)/device(s) that is(are) the source of
HDMI content.
Note: If the source of HDMI content is non-PC, such as a DVD player, a
male-to-male HDMI cable can be used instead of the custom HDMI
KVM cable set.
10. Plug your USB peripherals into the type A sockets (one easy-access port is
located on the front for portable devices; the second is located on the rear).
11. Power on the displays.
12. Plug the power adapter that came with the CM0264 package into an AC
power source, then plug the power adapter cable into the switch's power
jack.
13. Power on the computers/devices.
Note: The recommended power-on sequence is Port 1–Port 2–Port 3–Port
4. See Default Display and Power On Sequence, page 13, for further
details
10