ATEN CM0264 User Manual page 16

CM0264 User Manual
No. Component
1 LED Status Panel This panel contains LED icons that light to indicate mode
2 Port Selection
Pushbuttons
3 Mode Selection
Pushbutton
4 Console Audio
Ports
5 USB 2.0
Peripheral Port
6
and port status. The Mode and Port Selection Pushbuttons
each have three corresponding LED icons that represent
audio, KVM1/V2, and USB status. See LED Display,
page 14, for full details.
Press the Port Selection Pushbuttons to manually
switch ports. See Manual Switching, page 15, for full
details.
Press and hold Port Selection Pushbuttons 1 and 2
simultaneously for 2 seconds to start Auto Scan Mode.
See Going Directly to a Port, page 24, for full details.
Press and hold Port Selection Pushbuttons 3 and 4
simultaneously for 2 seconds to execute a KVM reset.
See KVM Reset, page 19 for full details.
This pushbutton allows you to cycle through the three
modes of focus – KVM1/V2, audio, and USB.
Press and hold Mode Selection Pushbutton before
powering on the CM0264 to enter Firmware Upgrade
Mode. See Starting the Upgrade, page 48 for full details.
Your speakers and microphone plug in here.
USB 2.0 peripherals (printers, scanners, etc.) plug into this
port.
Description