Sms Function - ATCOM AT840 series User Manual

AT8 AT8 AT8 AT84 4 4 4 0 0 0 0 Series Series Series Series User User User User Manual
6) Press the navigation button to choose "Call History" and then press OK button.
7) Press the navigation button to choose "Answered Calls", press soft button OK.
8) Press the navigation button to browse the incoming call records. If there is no record, the LCD
screen display "List is Empty".
� Outgoing call
1) Press "MENU"
2) Press up or down navigation key, and select "Call history" and press soft button "OK"
3) Select "Redial list" through "up" or "down" key, and press soft button "OK"
4) Press up or down navigation button and check the received calls, LCD will show "List is
Empty", if there is no received incoming call.
12) 12)SMS 12) 12)

SMS function

SMS SMS function function function
� Create new SMS
1) Press right navigation key
2) Press SMS
3) Press New
4) Edit SMS context and you can switch the input method by press right navigation key then
press "Alpha" to change to "Num", press "Num" to change to "IP".
5) When the edit is done , press "Send" and input receiver's phone number or IP.
After inputting receiver's address, press Send to send out your message.
� SMS Check new SMS
When there is a new SMS, voicemail indicator will flicker.
1) press right navigation key
2) press SMS
3) press View to check the new SMS
4) Press Reply to reply the SMS, or press Delete to delete this SMS
5) Press Cancel to exit.
13) 13) Default Default Password Password
13)Default 13) Default Password Password
There are 2 models to set the authority of web accessing and command line: User model and
Admin model. All the parameters can be visible and changed in Admin mode while part of them
can be visible in User mode.
� Web Web Web Web interface: interface: interface: interface:
� User Model
Username：user
� Admin Model：
Username：admin
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
no default Password
no default Password
www.atcom.cn
18