Table of Contents
Advertisement
C
hannel
3
.2.1.2 Authentication and Security
Paramete
r
Authentication Type
A
uthentication Type
Minor change is recommended.
T
his setting is only available for Ad Hoc mode. Select the number
of the radio channel used for the networking. The channel setting
should be the same with the network you are connecting to.
Description
This setting h
as to be consistent with the wireless networks that
the card intends to connect.
Open – No authentication is
S
hared – Only wireless devices using a shared key (WEP Key
identified) are allowed to connecting each other.
L
EAP – LEAP is a pre-EAP, Cisco-proprietary protocol, with many
of the features of EAP protocols. Cisco controls the ability of other
vendors to implement this protocol, so it should be selected for
use only when limited vendor choice for client, access-point, and
server products is not a concern. When you have set up LEAP
authentication, you have to enter the user name and password
your computer.
11
needed among the wireless network.
of
Advertisement
Table of Contents
