Table of Contents
Advertisement
3.2.1 Configure the Profile
3.2.1.1 Configuration
Parameter
Profile Name
SSID
PSM (Power Saving Mode)
Network Type
Description
Define a recognizable profile name for you to identify the different
networks.
The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of two co-located WLANs.
You may specify a SSID for the WL-3565 and then only the device
with the same SSID can interconnect to the card. If you want to
add the network nearby to the profile list, pull down the menu, all
the networks will be listed for you to add one of them to the profile
list.
The power saving function is only available when the network type
is in Infrastructure.
CAM (Constantly Awake Mode) – The card will always set in
active mode.
PSM (Power Saving Mode) – Enable the card in the power
saving mode when it is idle.
Infrastructure – This operation mode requires the presence of an
9
Advertisement
Table of Contents
