Ap Bridge - Point To Point Mode - Planet WAP-4033 User Manual

Parameter
Mode
Band
ESSID
WLAN MAC
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press "Continue" for
configure other settings or "Apply" to restart WAP-4033 with new configuration.
3.2.4

AP Bridge - Point to Point Mode

This function allows WAP-4033 to bridge 2 wired Ethernet networks wirelessly.
Parameter
Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
Description
Shows the current operation mode.
2.4GHz (B): It forces the WAP-4033 to operate in 802.11b only.
2.4GHz (G): It forces the WAP-4033 to operate in 802.11g only.
2.4GHz (B+G): It allows the WAP-4033 to operate in 802.11b and 802.11g
simultaneously.
Please make sure the ESSID of the wireless network that you will connect
and enter the correct value in this field. The default SSID is "default".
Keep default setting: WAP-4033 will use it's own MAC address to access
the wireless LAN.
Press "MAC Clone" button: It will use PC's MAC address to access the
wireless LAN.
16