Planet ICA-550W User Manual page 57

Preset Point Position Screen
This screen is displayed when the Preset Point Position button on the Pan/Tilt screen is
clicked.
Data –Preset Point Position Screen
Set Position
Calibration
Preset List
Preset Name
Figure 44: Preset Point Position Screen
Set the desired position through adjusting the control panel.
Click this button to reset the calibration of Pan/Tilt area.
Select the desired Preset. The screen will update with the current
data for the selected Preset Position.
Enter a suitable name for the Preset Position.
If no name is entered, the preset will have a number only.
51