•
Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
•
Click Next to continue.
3. You will be prompted to enter the Administrator Name and Administrator Password, as
shown below.
•
If using the default values, enter admin for the name and password.
•
Otherwise, enter the Administrator Name and Administrator Password set on the
Maintenance screen.
4. On the following IP Address Settings screen, shown below, choose Fixed IP Address or
Dynamic IP Address.
•
Fixed IP Address is recommended, and can always be used.
•
Dynamic IP Address can only be used if your LAN has a DCHP Server.
Click Next to continue.
5. If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed.
Figure 5: Password Dialog
Figure 6: Fixed or Dynamic IP Selection
10