Pioneer XW-SMA1 Operating Instructions Manual page 22

04 Connect to network
D: Using a Web browser on a computer
supporting wired LAN to make connecting
settings for the unit
1 Use a LAN cable to connect the unit to the
computer.
2 Connect the AC adapter, and press
 standby/on button.
The on indicator will flash blue. Wait for about 30 to 40
seconds.
DC IN
3 Wait for the network indicator to change
from flashing to steadily lighted red.
This may require up to 90 seconds or so.
22
En
LAN(10/100) iPod/iPhone/iPad DC IN AUX IN
AUX IN
6
4 When the network indicator lights red, start
your computer's Web browser, and access the
URL noted below to make settings for this unit.
The Web Control menu will appear.
SMA
http://169.254.1.1
For Safari
Press Bookmark icon ( ) at the upper left of the screen.
Click Bonjour list (a), and then select this unit's name
("Friendly Name") (b) in Bookmark.
a
b
SMA
5 From the menu on the left, select "Network
Configuration."
If you wish to change the Friendly Name, select "Friendly
Name" from the menu and change the name before selecting
"Network Configuration."
S1000.1000.0
XW-SMA1
XX:XX
X:X
XXX:XXX
X:X
X:X