Rear Panel - Pioneer XW-SMA1 Operating Instructions Manual

Wireless sound system
Hide thumbs Also See for XW-SMA1:
Table of Contents

Advertisement

03
Part names and functions
6
input button
Select the input source.
iPod  AUX IN  iPod (return to the beginning)
*When AirPlay or DMR play begins, the unit's input
function automatically switches respectively to AirPlay
or DMR. If the power is then turned OFF and later
turned ON again, the unit will return to the input
function last selected before AirPlay or DMR began.
7
volume –/+ button
Use to adjust the listening volume.
The listening volume has a range from 0 to 50 (however, the
unit is not equipped with a display to visually indicate the
volume level).

Rear panel

Open the terminal cover before connecting other various devices to the unit (XW-SMA3 only). Before making or changing the
connections, switch off the power and disconnect the power cord from the AC outlet.
Movable range of the wireless
antenna
160°
1
Wireless antenna
Receives signals from wireless devices.
2
network setup/wireless direct button
Use to set the wireless network (page 18).
3
LAN (10/100) connector
Connect this unit to other network devices using a LAN cable.
4
iPod/iPhone/iPad connector
Use to connect iPod/iPhone/iPad as an audio source. This
unit does not support any USB device other than iPod/
iPhone/iPad.
5
DC IN terminal
Connect to AC adapter.
6
AUX IN jack
Use to connect an auxiliary playback device (page 34).
16
En
100°
1
LAN(10/100)
iPod/iPhone/iPad
3 4
Note
• When pressing the input button for 3 seconds while this
unit is power on, this unit switches to the Quick Start
Mode. In the Quick Start Mode, when AirPlay or DMR is
played, this unit automatically turns on (page 35).
• When using the XW-SMA3, the Quick Start Mode can be
set only when the AC adapter is connected.
2
network setup
wireless direct
DC IN 15 V
AUX IN
SOUND TUNED
BY ANDREW JONES
Chief Speaker Engineer
5 6
Caution
• The terminal cover may be detached if pulled strongly
away from the unit (XW-SMA3 only). If the terminal cover
becomes detached, press the cover's protruding pins
into the connector openings on the unit, then use a
narrow non-pointed stick or other implement to push
through from above. Take care not to injure your eyes or
fingers when doing this.
XW-SMA3
Terminal Cover

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw-sma3Xw-sma4

Table of Contents