Using The Equalizer - Pioneer AVH-P5950DVD Operation Manual

Dvd av receiver
Hide thumbs Also See for AVH-P5950DVD:
Table of Contents

Advertisement

Section
04
Available accessories
! ADJUSTMENT – Adjust the time alignment
as desired
# You cannot select AUTO TA if auto TA and EQ
has not been carried out.
# You cannot select ADJUSTMENT when
neither FRONT-L nor FRONT-R is selected in
POSITION.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in CUSTOM.
1
Touch NEXT on the DSP function menu.
2
Touch TIME ALIGNNMENT and then
touch ADJUSTMENT.
# You cannot select ADJUSTMENT when
neither FRONT-L nor FRONT-R is selected in
POSITION.
3
Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speak-
er in the following order:
FRONT L (front speaker left)—CENTER (center
speaker)—FRONT R (front speaker right)—
REAR R (rear speaker right)—REAR L (rear
speaker left)—SUB WOOFER (subwoofer)
# You cannot select speakers whose size is set
at OFF. (Refer to Setting the speaker setting on
page 79.)
4
Touch c or d to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each time you touch c or d increases or de-
creases the distance. 0.0cm to 500.0cm is dis-
played as the distance is increased or
decreased.
82
En

Using the equalizer

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
POWERFUL
NATURAL
VOCAL
FLAT
CUSTOM1
CUSTOM2
SUPER BASS
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% On the normal display, touch EQ to se-
lect the equalizer.
Touch EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—SUPER BASS
# If SFC instead of EQ appears on the normal
display, touch SFC and hold to switch to equalizer
function. About SFC, refer to Using the sound
field control on page 75.
Equalizer curve
Powerful
Natural
Vocal
Flat
Custom 1
Custom 2
Super bass

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents