Setting The Divx Subtitle File; Displaying Your Divx Vod Registration Code; Setting For Digital Output - Pioneer AVH-P5950DVD Operation Manual

Operating this unit
# If you input an incorrect code number, the
icon is displayed. Touch C and input the cor-
rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.
5 Touch any of 1 to 8 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to Changing the level on the previous
page, and touch C 10 times. The registered
code number is canceled, letting you register
a new one.

Setting the DivX subtitle file

You can select whether to display DivX exter-
nal subtitles or not.
! The DivX subtitles will be displayed even
when CUSTOM is selected if no DivX exter-
nal subtitle files exist.
1 Touch NEXT on the DVD setup menu.
2 Touch DivX SUB TITLE to select the de-
sired subtitle setting.
! ORIGINAL – Display the DivX subtitles
! CUSTOM – Display the DivX external subti-
tles
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more then 126 characters are set,
the excess characters will not be displayed.
Displaying your DivX
registration code
In order to play DivX VOD (video on demand)
content on this unit, you first need to register
the unit with your DivX VOD content provider.
You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
1 Touch NEXT on the DVD setup menu.
2 Touch DivX VOD.
Your 8-digit registration code is displayed.
! Make a note of the code as you will need it
when you register with a DivX VOD provider.

Setting for digital output

Audio which is outputted from digital output
of this unit can be selected. Normally, set to
STREAM. If this unit's digital output is not
used, there is no need to change settings.
! Selecting Linear PCM enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to Selecting
audio output on page 34.)
— Dual mono mode DVD video discs
— Bilingual DVD-VR discs
1 Touch NEXT on the DVD setup menu.
2 Touch DIGITAL OUTPUT to select the de-
sired digital output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! Linear PCM – The Dolby Digital/DTS signal
is converted to and output as a linear PCM
signal
Section
03
®
VOD
45
En