Additional Information About The Printing System - Panasonic DP-3510 Operating Instructions Manual

Additional Information about the Printing System

• About Plug and Play
This printer driver is not Plug and Play-compatible.
• About setting of functions
When the same function is allowed to be set by both the application and the printer driver, the priority of
setting may be on the application side in some cases, and on the printer driver side in other cases.
• About rasterizing process
As all rasterizing process is performed on the computer side, the printing time depends on the processing
capability of the computer.
• About Scaling
Scaling may not function correctly in some applications. In this case, specify a zoom rate on the printer
driver to match the same size as the item being printed (100%).
• About printing through a network
When printing with the spooler setting set to [Print directly to the printer], stacked printing data in the
spooler may prevent printing. In this case, restart Windows on the Server and Client PC. Then, change
the spooler setting to other than [Print directly to the printer], and perform printing again.
• About printing through LPT1 on Windows 98/Me
If an LPT1 write error occurs, please change the spooler setting to [Start printing after last page is
spooled].
• If there are other pending document files when deleting documents during printing, deleting only
documents during printing may disturb images of the pending files.
In this case, delete the pending files as well. Then, turn the machine Off and On, and re-print the file(s)
again.
• About energy saver mode
LPT1 write error occurs when the device is in the Energy Saver Mode (Sleep), Press the Energy Saver key
on the device to make it revert from the Energy Saver Mode (Sleep).
• When using N in 1, and there are different document sizes in a file, N in 1 combines the documents with
the same size and then prints accordingly (i.e. You have 3 pages of Letter size documents and 2 pages of
Legal size documents. The first 3 pages will be in "2 in 1" format and are printed in Letter size, then the
following 2 pages will be in "2 in 1" format and are printed in Legal size).
• If strange data was printed when the job was canceled, select the "Detail" tab in the properties of the
printer, click the "Spool Settings" button, check "Spool print jobs so program finishes printing faster", and
check "Start printing after last page is spooled". (Windows 98/Me only)
• Do not use "Separator page" under "General" on the Windows printer setting screen.
• For information on restrictions concerning the Adobe PS printer driver, refer to the ReadmeAdobe.wri file
displayed when the Adobe PS printer driver is installed.
• This printer driver's help file is the standard help file for Adobe PostScript. For help on the printer
specifically, refer to these operating instructions.
• For information on other restrictions, refer to the "enreadme.wri" file in the operating instructions (CD-
ROM).
• To use
c:\pm65\rsrc\UsEnglish\ppd4\.
1. Copy the printer's PPD file to \pm65\rsrc\UsEnglish\ppd4\ on the hard disc on which Adobe
PageMaker 6.5 is installed.
2. Select "Print" from the "File" menu.
3. Set both "Printer" and "PPD" to "Panasonic DP-6010PS".
94
Adobe PageMaker 6.5 with Windows, copy the PPD file on the CD to