Connecting Tv's/Monitors - VocoPro DA-3808 PRO Owner's Manual

Getting Connected cont.
Connecting to a TV using the RCA Video (yellow) Output
What you will need
• TV/ video monitor with an RCA video input
• RCA video cable (yellow)
1. Connect one end of the RCA video cable to either of the two RCA video OUT jack on the DA-3808 PRO rear panel.
2. Connect the other end of the RCA video cable to the RCA video input on the TV/Video monitor.
3. Make sure the TV/Video monitor is set to the correct video input. Consult the TV/Video monitor's user manual for
the necessary instructions.
������� ��� ���� �����
���
��� ���
�����
����������
�� ��� ���� ���
��� �������
�������� ����� ���
�� ��� �����
CH + MENU
VOL +
CH - VOL - TV/AV POWER
14
WARNING: TO REDUCE THE RISK
����� ��� ������� ���
OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
���������������� �������
RAIN OR MOISTURE
����� ������������ ����
������ ���
CAUTION: TO PREVENT ELECTRIC
SHOCK, DO NOT REMOVE COVER
SCREWS. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
������� ������
��������� ��� ����
����� � ������
��
CAUT
REDU
RISK
REPL
ONLY
SAME
FUSE
�� �������
��������
110V
���
��
�� �
220V
THE POWER
SUPPLY CORD
SHOULD BE
DISCONNECTED
BEFORE
CHANGING THE
�����
VOLTAGE
���
SELECTOR