Troubleshooting - TP-Link TD-W8961ND Quick Installation Manual

Modem router

Hide thumbs Also See for TD-W8961ND:

Troubleshooting

T1. How do I restore my Router's configuration to its factory default settings?

With the Router powered on, press

and hold the RESET button on the

rear panel for 8 to 10 seconds

before releasing it.

Press it for 8 to 10 seconds

Once the Router is reset, the current configuration settings will be lost and

Note

you will need to re-configure the router.

T2. What can I do if I don't know or forgot my password?

Restore the Router's configuration to its factory default settings. If you don't

know how to do that, please refer to section T1.

Use the default user name and password: admin, admin.

Try to configure your Router once again by following the instructions in the

previous steps of the QIG.

T3. What can I do if I cannot access the web-based configuration page?

1) Configure your computer's IP Address.

For Windows XP OS

Go to Start > Control Panel,

you will then see the following

page.

Click

Network

Internet Connections

and

Table of Contents

Td-w8951nb