Network; Wan - TP-Link TL-WR740N User Manual

4.5

Network

Figure 4-4 the Network menu
There are three submenus under the Network menu (shown in Figure 4-4 ): WAN, LAN and MAC
Clone. Click any of them, and you will be able to configure the corresponding function.
4.5.1

WAN

Choose menu "Network→WAN", and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-5):
TL-WR740N/TL-WR741ND
Figure 4-5 WAN - Dynamic IP
25
150Mbps Wireless N Router