TP-Link TL-WR740N User Manual page 75

Rule Name - In this field, create a name for the rule. Note that this name should be
unique (e.g. Rule_1).
Host - In this field, select a host from the drop-down list for the rule. The default value is
the Host Description you set just now.
Target - In this filed, select a target from the drop-down list for the rule. The default value
is the Target Description you set just now.
Schedule - In this field, select a schedule from the drop-down list for the rule. The
default value is the Schedule Description you set just now.
Status - In this field, there are two options, Enable or Disable. Select Enable so that the
rule will take effect. Select Disable so that the rule won't take effect.
5. Click Finish to complete adding a new rule.
Method Two:
1. Click the Add New... button and the next screen will pop up as shown in Figure 4-50.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose "Click Here To Add New Host List".
4. Select a target from the Target drop-sown list or choose "Click Here To Add New Target
List".
5. Select a schedule from the Schedule drop-down list or choose "Click Here To Add New
Schedule".
6. In the Status field, select Enabled or Disabled to enable or disable your entry.
7. Click the Save button.
For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
TL-WR740N/TL-WR741ND
Figure 4-50 Add Internet Access Control Entry
67
150Mbps Wireless N Router