TP-Link TL-WR740N User Manual page 107

Note:
If the above configuration takes effect, you can visit and configure the Router by typing
http://192.168.0.1:88
field of the Web browser. If the LAN IP of the modem connected with your router is
192.168.1.x, the default LAN IP of the Router will automatically switch from 192.168.0.1 to
192.168.1.1 to avoid IP conflict; in this case, please try http://192.168.1.1:88.
3) Log in to the Router, click the "Forwarding" menu on the left of your browser, and click
the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New..., then
on the "Add or Modify a Virtual Server" page, enter "80" into the blank next to the
"Service Port", and your IP address next to the "IP Address", assuming 192.168.0.169
for an example, remember to Enable and Save.
5. The wireless stations cannot connect to the Router.
1) Make sure the "Wireless Router Radio" is enabled.
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
TL-WR740N/TL-WR741ND
(the Router's LAN IP address: Web Management Port) in the address
Figure A-9 Virtual Servers
Figure A-10 Add or Modify a Virtual server Entry
150Mbps Wireless N Router
99