Chain Lubricant - Echo CS-400 Instruction Manual

Mixing Instructions
1. Fill an approved fuel container with half of the required
amount of gasoline.
2. Add the proper amount of 2-stroke oil to gasoline.
3. Close container and shake to mix oil with gasoline.
4. Add remaining gasoline, close fuel container, and remix.
IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emis-
sions. Some states may require the use of automatic
fuel shut-off containers to reduce fuel spillage.
After use
• DO NOT store a unit with fuel in its tank. Leaks can occur.
Return unused fuel to an approved fuel storage container.
Storage - Fuel storage laws vary by locality. Contact your
local government for the laws affecting your area. As a pre-
caution, store fuel in an approved, airtight container. Store in
a well-ventilated, unoccupied building, away from sparks and
flames.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you
expect to use in thirty (30) days, ninety (90) days
when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALwAyS
shake fuel container thoroughly before each use.
Cap indication
Fuel/oil tanks are indicated by the following
illustrations.
Fuel tank cap
CS-400
Oil tank cap
16
Fuel Mix Chart

CHAIN LUBRICANT

Proper lubrication of the chain while in operation
reduces friction between the chain and the guide bar
to a minimum and assures a longer service life.
• Use bar and chain oil of high quality for this pur-
pose.
• Do not use used or reclaimed oil to avoid various
oiler problems.
• Use ECHO bar and chain oil.
• when ECHO bar and chain oil is not available:
Use motor oil, etc.
• Use bar and chain oil of the following grades:
SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting resin-
ous trees.
• When refueling, also refill chain oil.
50:1