Table of Contents
Advertisement
Selecting the power tap (CF-2TX only):
Make sure the power amplifier is turned off when adjusting the power taps or making
connections.
1. Select the desired power tap by turning the switch
with a flat-ended screwdriver.
If you are using a 70 V system, the wattage ratings are:
8, 16, 32, and 64 W.
If you are using a 100 V system, the available wattage
ratings are: 16, 32, and 64 W.
Make sure that you do not overload the amplifier. This may
cause overheating to the amplifier, and possible damage
to your loudspeakers. To avoid overloading, make sure that
the selected taps on each bracket in the line add up to no
more than 80% of the rated power of the amplifier being used.
7
CF-2LZ/CF-2TX–
Advertisement
Table of Contents
