Table of Contents
Advertisement
2. When you want to configure your wireless connection, please right click on
this icon, and a popup menu will appear. You can click Launch Config
Utility to start configuration program.
3. The VigorN65 Utility window will appear as the following. Basically, the
software will scan and display available wireless AP automatically.
4. If you can not see the access point you wish to connect here, please click
Rescan button to scan for access point again, until the one you preferred is
displayed.
5. Click the wireless access point or network device you wish to connect, it
will be highlighted, then click Connect.
Advertisement
Table of Contents
